Skip to content
KAR DATASHIP

The concept

How a vessel or barge becomes a floating data center

A floating data center is a data center whose building is a hull. The IT equipment is the same as on land. What changes is the platform it stands on, how it gets power and cooling, and the rules that apply to it.

Concept elevation of a barge-based floating data centerA flat-deck barge moored alongside a quay. Six containerised data center modules stand on the main deck with heat rejection units on their roofs, an electrical room at the aft end and a network and control house forward. Power and fiber cables connect the barge to the quay. A dashed line indicates a possible cooling water intake below the waterline.PLATFORM LENGTH: PROJECT-SPECIFICWLA IT MODULESB HEAT REJECTIONC ELECTRICAL ROOMD NETWORK & CONTROLE SHORE POWER & FIBERF COOLING WATER (SUBJECT TO ASSESSMENT)
Concept visualization, not an approved design

Interactive diagram

Eight systems on one platform

Select an area of the plan to see what it does and what we look at when we assess it for a project.

QUAYHV / LVHX / PUMPSFIREMMRCONTROLAFTFWD

Conceptual plan view. Not to scale, not an engineering drawing or approved design.

Data center modules

Containerised or prefabricated data halls placed on deck or in converted holds. Layout follows rack density, service clearances, hot and cold aisle arrangement and maintenance access.

What we assess

  • Intended IT load and rack density
  • Module type: containerised, prefabricated or built-in
  • Zoning between IT, plant and marine spaces

System by system

Technical overview

01

Marine platform

The hull is the foundation. A barge offers a large, flat deck and simple hydrostatics; a converted ship may bring existing machinery spaces and accommodation but tighter internal geometry.

  • Hull condition, class history and remaining life
  • Intact stability with the added topside weight
  • Mooring arrangement, fendering and berth exposure
02

Structural infrastructure

Data modules and plant are heavy and concentrated. Foundations have to carry them into the hull's strength members, isolate vibration and allow modules to be lifted on and off.

  • Deck strength and permissible point loads
  • Foundation and seating design for modules
  • Vibration and motion limits for IT equipment
03

Data center modules

Containerised or prefabricated data halls placed on deck or in converted holds. Layout follows rack density, service clearances, hot and cold aisle arrangement and maintenance access.

  • Intended IT load and rack density
  • Module type: containerised, prefabricated or built-in
  • Zoning between IT, plant and marine spaces
04

Power distribution

Most concepts take primary power from shore through a high-voltage connection, with transformers, switchgear and UPS on board. Backup generation is assessed case by case against site rules and emissions limits.

  • Available grid capacity at the berth
  • Redundancy target for distribution and UPS
  • Backup power concept and fuel or storage options
05

Cooling systems

Heat can be rejected to air through dry coolers or, where permitted, to the surrounding water through a closed-loop heat exchanger. Liquid cooling for high-density racks changes the whole thermal chain and is assessed early.

  • Thermal load and its profile over the day and year
  • Water temperature, depth and discharge permits
  • Air, liquid or hybrid cooling architecture
06

Fire protection

A floating data center has to satisfy both marine fire safety thinking and data center practice. Detection, suppression, compartmentation and escape routes are planned together with the authority that will approve them.

  • Applicable rules: flag, class, port and local codes
  • Detection and suppression type per space
  • Structural fire protection and escape routes
07

Network connectivity

Fiber lands at the quay and crosses to the platform through flexible connections designed for the vessel's movement. Diverse routes reduce the chance of a single cut isolating the site.

  • Fiber availability and carriers near the berth
  • Diverse entry routes onto the platform
  • Meet-me room and carrier-neutral options
08

Monitoring & control

One control room watches both worlds: hull, mooring, ballast and bilge alongside power, cooling and IT environment. Alarms and data feed a single operating picture.

  • Integration of marine and DCIM monitoring
  • Remote operation and staffing model
  • Cyber security of operational systems

Capacities, dimensions and ratings are not stated on this page on purpose. They depend on the platform, the site, the available grid connection and the approvals obtained, and are defined during a project-specific technical assessment.

Have a vessel, barge or berth in mind?

Share what you know about the platform or site. We will tell you which of these eight systems decides feasibility in your case.