Skip to content
KAR DATASHIP

Vessel Conversion

Can ships be converted into data centers?

What makes a ship a good or poor candidate for data center conversion: hull condition, internal volume, stability, existing systems and the economics against a new barge.

6 min read

Some can. Whether a particular ship can is a question of structure, space, stability and cost, and the answer is often no. That is useful to know before anyone pays for detailed design.

What a ship brings

A ship that is nearing the end of its trading life may still have a sound hull, a large enclosed volume, existing electrical distribution and sometimes accommodation and workshops. Enclosed holds can protect IT equipment from weather and salt air better than an open deck. Reusing a hull also avoids building a new steel structure.

What works against conversion

  • Internal geometry. Holds shaped for cargo are not shaped for rows of racks with service aisles. Tween decks, hatch coamings and frames can waste much of the volume.
  • Hull condition. Steel thickness, coating and the vessel's class history decide how much life remains and what repair is needed first.
  • Stability. Removing engines and cargo gear and adding modules, transformers and cooling plant changes the weight distribution. The converted ship still has to meet stability criteria at its berth.
  • Existing systems. Propulsion machinery, fuel systems and some piping may have to be removed, which adds cost and work.
  • Approvals. A conversion usually means new plans for the classification society and flag or port authorities, especially for fire protection.

Which hull types are worth a look

Vessels with large open decks or simple box-shaped holds tend to be better candidates than those with complex internal arrangements. Ro-ro ships, some general cargo and container ships, and pontoons are often screened first. Tankers are generally harder because of tank structure and cleaning requirements.

Ship or barge?

The honest comparison is often between converting a ship and building or buying a flat-deck barge. A barge is simpler to analyse and gives a clear deck for modules. A ship may be cheaper to acquire and may already carry useful equipment. The right answer depends on the vessel on offer, the berth and the target IT load.

How we approach it

We start with a screening review of the vessel particulars, general arrangement and class records. If the vessel passes, we look at weight and stability with the proposed topside, then at how power, cooling and fiber would reach the spaces. Each step can end with a clear "not suitable", which is a valid and inexpensive result.

Applying this to a real project?

Tell us about the vessel, barge or site you are looking at and we will discuss what applies to it.